Cuts and Style

Troubleshooting Guide: Andis Clippers Not Cutting Properly

Andis Clippers Not Cutting Properly

Table of Contents

Are you experiencing frustration with your Andis clippers not performing up to your expectations? Don’t worry; you’re not alone. Many individuals encounter the common issue of Andis clippers not cutting as they should. Whether you’re a professional barber or prefer to groom your hair at home, it’s essential to understand the underlying causes and potential solutions for this problem.

In this article, we will delve into why Andis clippers may not be cutting effectively and provide practical tips and troubleshooting techniques to get them back to their maximum performance. We’ll cover it all, including dull or misaligned blades, motor issues, etc.

So, if you’re tired of struggling with your Andis clippers and seeking ways to overcome this hurdle, keep reading. Let’s dive in and explore the common problem of “Andis Clippers Not Cutting.”

Andis 01690 Professional Fade Master Hair Clipper - Zero Gap, Unbreakable Aluminium Housing
Andis Fade Master Hair Clipper

Common Causes of Andis Clippers Not Cutting

When your Andis clippers fail to deliver the expected cutting performance, it’s essential to identify the underlying causes. Get to know why Andis Clippers fail to cut.

Unclean or dirty Clippers

If your clippers are dusty, you will expect a better cut. In that case, you need to clean them. Otherwise, it may lead to severe problems.

When your clippers require cleaning, you may have one-time, active, and in-depth cleaning.

Still, you can read the guide to clean the clippers in confusion.

Dull or Misaligned Blades

Over time, the blades of your Andis clippers can become dull due to daily use or inadequate care. Worn blades can struggle to cut through hair smoothly, resulting in uneven and unsatisfactory results.

Similarly, if the edges are not properly aligned, they may not make clean and precise cuts. Routine blade care, sharpening, and alignment are crucial to ensure maximum cutting efficacy.

Blunt Ends Clipper

The blades are blunt if you notice snagging or pulling of hair during a haircut. The dull blades won’t cut and harm your hair. Not sharpening the blades will damage the tool, but too much will worsen the clipper. In such cases, the blades or clippers need to be replaced.

Insufficient Blade Tension

Blade tension plays a significant role in the cutting functionality of Andis clippers. If the pressure is too loose, the edges may not have sufficient contact with each other, leading to ineffective cutting. On the other hand, if the tension is too tight, it can cause excessive friction, which hampers smooth cutting. Adjusting the blade tension is vital to achieving optimal cutting results.

Motor Issues

The motor of your Andis clippers drives the blades and ensures a consistent cutting experience. If the motor is experiencing problems or not running at total capacity, it can affect the cutting working.

Low Power Supply

Power supply inadequacy, such as low battery power or inconsistent electrical connection, can also impact the clippers’ ability to cut smoothly. Ensuring a reliable power source and addressing motor-related problems are essential for ideal cutting potential.

Hair Length and Texture

The length and texture of the hair being cut can also influence the working of Andis clippers. Excessively long hair may pose challenges for the blades, making achieving clean and precise cuts difficult.

Furthermore, certain hair textures, such as thick or curly hair, require more power and precision to cut through effectively. Adjusting cutting techniques and using appropriate blade attachments can help overcome these challenges and ensure satisfactory results.

Fixing Andis Clippers That Are Not Cutting

Dive into the solutions to resolve the cutting operations of Andis Clipper.

Cleaning Hair Clippings and Debris

Hair clippings and debris can accumulate on the blades and within the clipper body itself. This dirt can hinder the clippers’ capability and lead to clogging or reduced power to cut. Regularly clean the clipper body using a brush or a soft cloth to remove any hair clippings or debris.

Pay attention to the air vents and other crevices where buildup can occur. Keeping the clipper body clean and free from obstructions will ensure proper airflow and better function.

Checking and Adjusting Blade Alignment

Misaligned blades can result in uneven cuts and ineffective performance. Remove the blade assembly from the clippers and visually inspect the alignment. If you notice any misalignment, carefully realign the blades according to the manufacturer’s instructions. Once the edges are correctly attached, reassemble them onto the clippers and test their cutting efficiency.

Blade Maintenance and Lubrication

Regular maintenance and lubrication of the blades are vital to keep them in optimal condition. Over time, hair clippings and debris can accumulate between the blades, affecting their cutting ability. Detach the blade assembly from the clippers and use a small brush or toothbrush to remove any hair or debris to address this.

Add a few clipper oil or lubricant drops to the blade surfaces to ensure smooth operation. Proper lubrication helps reduce friction and allows the blades to cut through hair effectively.

Blade Tension Adjustment

Adjusting the blade tension is crucial for achieving the desired cutting performance. Start by turning off the clippers and detaching the blade assembly. Locate the tension adjustment screw on the clippers and use a screwdriver or appropriate tool to adjust the tension.

If the blades feel loose, tighten the screw slightly, ensuring they have proper contact without being overly tight. Conversely, if the edges feel too close, loosen the screw slightly. Regularly check and adjust the blade tension to maintain optimal cutting performance.

Advanced Solutions for Andis Clippers Not Cutting

The one step is to make your Andis clipper zero-gap, which will enhance the cutting ability of the clippers. You can follow the article on how to get zero-gapping.

Andis T-Outliner & GTX Replacement One Hittaz Zero Gap Modified T Blades

Andis T-Outliner & GTX Replacement One Hittaz Zero Gap Modified T Blades

Check Price on Amazon

Conclusion

In this article, we have delved into the general problem of why Andis clippers won’t cut and provided valuable insights to help you understand and address this issue.

With the knowledge and solutions provided in this article, you can tackle the issue of “Andis Clippers Not Cutting” and achieve satisfactory results.

Cuts and Style
Cuts and Style
At Cuts and Style, we help readers create personalized hairstyles and self-grooming using the best haircut tools. With a deep knowledge of the barbering industry, we bring our expertise on day-to-day tools to meet the needs of wise hair-clipper users. We are offering insights and advice beyond the ordinary. Whether it's sharing advice on the latest trends, hacks, tips, or a selection of top hair care products, we are dedicated to guiding those seeking the perfect blend of style to look good and, in turn, feel good. Join us on this journey where cutting and styling hair is a skill.
Leave a Reply

Your email address will not be published. Required fields are marked *

Related Articles