Over time clipper blades like Andis become dull, but here you will learn how to sharpen them at home. We will walk through everything to keep your blades sharp and your clippers performing at their best.
Now delve into how you can sharpen clipper blades of Andis effectively at home.
Let’s get started!
Essential Tools for Sharpening Andis Clipper Blades
Here are the essential items you’ll need:
- Sharpening stones or honing tools
- Blade cleaning solutions
- Blade alignment tools
- Lubricating oil
- Safety goggles
- Protective gloves
- Stable work surface
Step-by-Step Guide to Sharpening Andis Clipper Blades at Home
Andis 73000 Envy Li Cordless Clipper With Adjustable Blade & Accessories
Check Price on AmazonFollow these instructions to make your Andis clipper blades sharp that won’t cut:
Removing the Blades
Make sure the clipper is turned off and unplugged to prevent any accidental activation during the process.
Engage the blade release mechanism to unlock the blades.
Gently slide the blade away from the clipper’s body while applying slight downward pressure. Once the blade is disengaged, carefully lift it away from the clipper.
Andis 64070 UltraEdge Carbon-Infused Steel Detachable Clipper Blade
Check Price on AmazonCleaning the Clippers before Disassembly
Use a soft brush or a toothbrush to remove loose hair or debris from the clipper’s exterior. Inspect the clipper for any buildup or residue, and wipe it down with a clean, dry cloth.
If there is visible dirt or grime, you can use a small amount of rubbing alcohol on a cloth to clean the clipper’s surface. Rinse under the water and dry thoroughly before removing the blade.
Sharpening Andis Clipper Blades
Place the sharpening stone on a stable surface or use a stone holder to keep it secure.
Start with a coarse grit stone (around 100-220 grit) for highly dull or damaged blades to remove any nicks or imperfections. If your blades are in relatively good condition and need maintenance, a medium to fine grit stone (around 400-1000 grit) is suitable.
Apply a small amount of lubricating oil to the stone’s surface for smooth sharpening.
Hold the blade at the proper angle, usually around 30 degrees, against the stone. Using light pressure, glide the blade across the stone sweepingly, maintaining a consistent angle.
Ensure that you sharpen both sides of the blade evenly to maintain balance.
Repeat the motion several times, alternating sides, until you achieve the desired level of sharpness.
Remember to take breaks during sharpening to prevent the blades from overheating. You can dip the edges in cool water or use a blade cooling spray to avoid excessive heat buildup.
Sharpening Stone Kit
Testing for Sharpness
Once you believe the blades are adequately sharpened.
Carefully touch the blade’s cutting edge with your thumb or tissue paper to check for resistance or drag. The blades are sharp if the blade glides smoothly or cuts through the tissue paper without resistance.
It may require further sharpening if there is noticeable drag or the blade fails to cut cleanly.
Put Back the Blades
Ensure that the clipper is turned off and unplugged. Locate the tension adjustment screw on the clipper. It is typically located near the blades.
Using a screwdriver or the provided tool, carefully turn the tension adjustment screw clockwise or counterclockwise to increase or decrease the tension respectively.
Make minor adjustments and test the tension by turning on the clipper and observing the blade movement.
Continue adjusting until the blades have a smooth and even movement without any excessive play or resistance.
Conclusion
With this newfound knowledge and the right tools, you can keep your Andis clipper blades sharp and ready for grooming. Enjoy the satisfaction of a well-maintained clipper and the superior results it provides.
Happy grooming!
