Do you want to know how to sharpen a hair clippers blade with sandpaper? The possibility can be that you are tired of buying new hair clippers or edges, which cost a lot or have blunt ends. Then you are in the right place.
You can achieve sharp, precise cuts in just a few minutes that ensure a smooth and professional haircut.
In this article, you will see how to use sandpaper to sharpen clipper blades.
Step-by-Step Guide: How to Sharpen Hair Clippers with Sandpaper
Here’s a list of what you’ll need:
- Cleaning Brush
- Hair clip Oil
- Soft Cloth or Towel
1. Removing the Blades
Learn how to safely detach the blades from your clipper, allowing you easy access for sharpening. Unbolt the edges using a screwdriver while avoiding any accidental cuts. With the blades in hand, you can proceed to the next step.
2. Sharpen with Sandpaper
Firmly grip the clipper blades on a flat surface. Move the clipper blades back and forth along the length of the sandpaper. Apply light pressure and ensure that the entire cutting edge of the blade makes contact with the sandpaper. Repeat this motion several times.
Read the full post for sharpening hair clippers.
3. Change the Sandpaper
If you find holding the clipper blades and sandpaper together challenging, you may use a small clamp to secure them in place. After a few strokes in one direction, switch to sharpening in the opposite direction. Continue alternating the direction of the strokes until you’ve covered the entire cutting edge.
4. Inspect the Blades
Periodically lift the clipper blades and inspect them to check the sharpening progress.
The blades are likely adequately sharpened if the edges feel sharp and smooth without snags or roughness. If needed, continue honing until you achieve the desired sharpness.
5. Clean the Blades
Clean with a brush or a toothbrush to remove loose hair or debris from the blades.
Put a few sprays of a clipper spray or a cleaning solution to get rid of built-up grease, oil, or residue.
Take a soft cloth or towel and carefully wipe down the blades to remove the cleaning solution and any remaining debris. Ensure the edges are completely dry before moving on to the next step.
6. Apply Lubricating Oil
Once the blades are clean and dry, it’s important to lubricate them before sharpening. Use a clipper oil or a light machine oil on the blades. Move the edges back and forth to distribute the oil evenly across the cutting surfaces.
Can I sharpen my clipper blades with sandpaper more than once?
Yes, you can sharpen your clipper blades with sandpaper many times. However, it’s essential to monitor the condition of the blades. Consider professional sharpening or blade replacement if you notice excessive wear, deep nicks, or damage.
What grit sandpaper should I use for clipper sharpening?
The appropriate grit sandpaper depends on the initial condition of your clipper blades. For blades in relatively good shape, start with medium-grit sandpaper (around 220 to 400 grit) for sharpening. If the edges are dull or damaged, begin with a coarser grit (about 120 to 180) to remove imperfections before moving to a finer grit for finishing.
Can I sharpen ceramic clipper blades with sandpaper?
No, sandpaper is not suitable for sharpening ceramic clipper blades. Ceramic blades are typically more rigid and brittle than steel blades, requiring specialized sharpening techniques and tools. It’s best to consult the manufacturer’s recommendations or seek professional help sharpening ceramic blades.
We hope this article has empowered you with the necessary information and steps to sharpen your hair clippers with sandpaper confidently. Enjoy the satisfaction of achieving professional results from the comfort of your own home.
Happy sharpening and happy grooming!