This article is right for you if you want to use a stone to sharpen your clipper blades. The stone grits can save your blades from becoming dull. I will guide you with simple steps on how to do it.
Let’s dive into sharpening clipper blades using stone.
Tools and Materials
Here are the essential tools you’ll need:
- Clipper Blade Sharpening Stone
- Honing Oil or Lubricant
- Screwdriver or Blade Removal Tool
- Cleaning Brush
- Safety Gloves
- Safety Glasses
- Blade wash
- Towel or cloth
How to Use A Stone to Sharpen Clipper Blades
Begin with simple steps.
1. Detach the Blades from Clippers
Sometimes your hair trimmers are removable. Typically, this involves loosening the screws that secure the blades using a screwdriver or the appropriate blade removal tool.
Carefully remove the blades from the clipper, taking note of their orientation and positioning for reassembly later. Handle the blades with care to avoid any accidental cuts or damage.
2. Inspecting the Blades
Inspect them closely for any signs of damage, wear, or dullness. Look for chips, nicks, or bent teeth that may affect the performance of the blades. If you notice any significant damage, consider replacing the blades before sharpening.
Additionally, inspect the blade alignment to ensure they are correctly aligned and parallel. If you notice any misalignment, it may require adjustment or professional servicing.
3. Cleaning and Removing Debris from the Blades
Start using a cleaning brush to remove loose hair, dirt, and debris from the blades. Gently brush along the teeth and edges to dislodge any trapped particles.
You can use a blade cleaning solution or a clipper blade cleaner for more thorough cleaning. Apply a small amount of the cleaner to the blades and use a brush or cloth to scrub away stubborn residue. Rinse the blades with warm water and pat them dry with a clean cloth.
Andis 12750 Cool Care Plus 5-in-1 Clipper Spray
Check Price on AmazonTake extra care to clean the small gaps between the teeth, as debris can accumulate there and affect the blade’s performance. Use a toothbrush or a specialized blade cleaning brush to reach those tight spaces.
4. Sharpening With Grindstone
To achieve razor-sharp clipper blades, using a grindstone is a time-tested method that delivers exceptional results.
Start by submerging the grindstone in water for 10-15 minutes, eliminating air bubbles and reducing its roughness. Then, position the stone flat, ensuring the 400-grit side faces up.
Place your blade perpendicular to the grindstone, flat against the stone’s interior, ensuring the teeth are facing away from you. Now, slowly drag the blade across the stone, applying moderate pressure. Keep count of your passes—around ten will do the trick.
Remember, you should hear a distinct scraping noise as you sharpen.
After these passes, examine your blade’s condition. You’ll notice the marker has vanished, and your blade shines with renewed vitality.
But don’t stop there! Flip the grindstone to the other side and double the number of strokes to buff the blade further. The result? A remarkable difference you’ll truly appreciate.
Remember, maintain control, and never force the sharpening process. Applying extra pressure can help if the blades aren’t sharpening well, but it’s time to stop if no improvement is seen.
Sharpening Stone Kit
5. Oiling Your Clipper Edges
Once satisfied with the sharpening results, clean the blades to remove any residue from the sharpening process. Spread the oil evenly across the surface of the blades, ensuring all teeth and edges are coated.
Put oil drops and allow it to penetrate for a few minutes to maximize its effectiveness. Use a cloth or paper towel to remove excess oil or debris.
Now, the blade is ready for new cuts. Keep them with care so they can last longer.
Conclusion
Congratulations! You have now mastered the art of sharpening clipper blades with a stone.
Now that you have acquired this valuable skill, you can confidently do clipper blade sharpening whenever needed.
You must go through the cleaning process to maintain them.
